diff --git a/.gitignore b/.gitignore
index 2c4c7ec7..a884b449 100644
--- a/.gitignore
+++ b/.gitignore
@@ -4,3 +4,6 @@ site-config/*
 
 ## Ignore site configuration
 */docker-compose.override.yml
+
+## MAC OS
+.DS_Store
diff --git a/README.md b/README.md
index e4ccb7c9..38a854f9 100644
--- a/README.md
+++ b/README.md
@@ -56,6 +56,8 @@ We recommend to install Docker(-compose) from its official sources as described
 
 Note for Ubuntu: Please note that snap versions of Docker are not supported.
 
+Note for git and Docker: if you have a local proxy, you will need to adjust your setup appropriately, see [git proxy](https://gist.github.com/evantoli/f8c23a37eb3558ab8765) and [docker proxy](https://docs.docker.com/network/proxy/).
+
 ### Network
 
 A running Bridgehead requires an outgoing HTTPS proxy to communicate with the central components.
@@ -262,28 +264,29 @@ Here a file will be mentioned, perhaps in the directory /etc/ssl/certs. The exac
 
 Your Bridgehead's actual data is not stored in the above directories, but in named docker volumes, see `docker volume ls` and `docker volume inspect <volume_name>`.
 
-### BBMRI-ERIC Directory
+### BBMRI-ERIC Directory entry needed
 
-If you run a biobank, you should register with the [Directory](https://directory.bbmri-eric.eu), a BBMRI-ERIC project that catalogs biobanks.
+If you run a biobank, you should be listed together with your collections with in the [Directory](https://directory.bbmri-eric.eu), a BBMRI-ERIC project that catalogs biobanks.
 
 To do this, contact the BBMRI-ERIC national node for the country where your biobank is based, see [the list of nodes](http://www.bbmri-eric.eu/national-nodes/).
 
-Once you have registered, **you should choose one of your sample collections as a default collection for your biobank**. This is the collection that will be automatically used to label any samples that have not been assigned a collection ID in your ETL process. Make a note of this ID, you will need it later on in the installation process.
+Once you have added your biobank to the Directory you got persistent identifier (PID) for your biobank and unique identifiers (IDs) for your collections. The collection IDs are necessary for the biospecimens assigning to the collections and later in the data flows between BBMRI-ERIC tools. In case you cannot distribute all your biospecimens within collections via assigning the collection IDs, **you should choose one of your sample collections as a default collection for your biobank**. This collection will be automatically used to label any samples that have not been assigned a collection ID in your ETL process. Make a note of this default collection ID, you will need it later on in the installation process.
 
-The Bridgehead's **Directory Sync** is an optional feature that keeps the Directory up to date with your local data, e.g. number of samples. Conversely, it also updates the local FHIR store with the latest contact details etc. from the Directory. You must explicitly set your country specific directory url, username and password to enable this feature.
+### Directory sync tool
+
+The Bridgehead's **Directory Sync** is an optional feature that keeps the Directory up to date with your local data, e.g. number of samples. Conversely, it also updates the local FHIR store with the latest contact details etc. from the Directory. You must explicitly set your country specific directory URL, username and password to enable this feature.
 
 Full details can be found in [directory_sync_service](https://github.com/samply/directory_sync_service).
 
 To enable it, you will need to set these variables to the ```bbmri.conf``` file of your GitLab repository. Here is an example config:
 
 ```
-### Directory sync service
 DS_DIRECTORY_URL=https://directory.bbmri-eric.eu
 DS_DIRECTORY_USER_NAME=your_directory_username
 DS_DIRECTORY_USER_PASS=qwdnqwswdvqHBVGFR9887
 DS_TIMER_CRON="0 22 * * *"
 ```
-You must contact the Directory for your national node to find the URL, and to register as a user.
+You must contact the Directory team for your national node to find the URL, and to register as a user.
 
 Additionally, you should choose when you want Directory sync to run. In the example above, this is set to happen at 10 pm every evening. You can modify this to suit your requirements. The timer specification should follow the [cron](https://crontab.guru) convention.
 
diff --git a/bbmri/modules/dnpm-compose.yml b/bbmri/modules/dnpm-compose.yml
index d7a253e3..90f0c07b 100644
--- a/bbmri/modules/dnpm-compose.yml
+++ b/bbmri/modules/dnpm-compose.yml
@@ -22,7 +22,7 @@ services:
 
   dnpm-beam-connect:
     depends_on: [ dnpm-beam-proxy ]
-    image: docker.verbis.dkfz.de/cache/samply/beam-connect:dnpm
+    image: docker.verbis.dkfz.de/cache/samply/beam-connect:develop
     container_name: bridgehead-dnpm-beam-connect
     environment:
       PROXY_URL: http://dnpm-beam-proxy:8081
@@ -34,6 +34,7 @@ services:
       HTTPS_PROXY: http://forward_proxy:3128
       NO_PROXY: dnpm-beam-proxy,dnpm-backend
       RUST_LOG: ${RUST_LOG:-info}
+      NO_AUTH: "true"
     volumes:
       - /etc/bridgehead/dnpm/local_targets.json:/conf/connect_targets.json:ro
       - /etc/bridgehead/dnpm/central_targets.json:/conf/central_targets.json:ro
diff --git a/bridgehead b/bridgehead
index 5793370a..b937635c 100755
--- a/bridgehead
+++ b/bridgehead
@@ -73,7 +73,6 @@ case "$ACTION" in
 		hc_send log "Bridgehead $PROJECT startup: Checking requirements ..."
 		checkRequirements
 		hc_send log "Bridgehead $PROJECT startup: Requirements checked out. Now starting bridgehead ..."
-		export LDM_LOGIN=$(getLdmPassword)
 		exec $COMPOSE -p $PROJECT -f ./minimal/docker-compose.yml -f ./$PROJECT/docker-compose.yml $OVERRIDE up --abort-on-container-exit
 		;;
 	stop)
@@ -103,9 +102,16 @@ case "$ACTION" in
 	uninstall)
 		exec ./lib/uninstall-bridgehead.sh $PROJECT
 		;;
+	adduser)
+		loadVars
+		log "INFO" "Adding encrypted credentials in /etc/bridgehead/$PROJECT.local.conf"
+    		read -p "Please choose the component (LDM_AUTH|NNGM_AUTH) you want to add a user to : " COMPONENT
+    		read -p "Please enter a username: " USER
+    		read -s -p "Please enter a password (will not be echoed): "$'\n' PASSWORD
+    		add_basic_auth_user $USER $PASSWORD $COMPONENT $PROJECT
+		;;
 	enroll)
 		loadVars
-
 		do_enroll $PROXY_ID
 		;;
 	preRun | preUpdate)
diff --git a/ccp/docker-compose.yml b/ccp/docker-compose.yml
index 1e5be264..5a0db068 100644
--- a/ccp/docker-compose.yml
+++ b/ccp/docker-compose.yml
@@ -7,7 +7,6 @@ services:
     environment:
       BASE_URL: "http://bridgehead-ccp-blaze:8080"
       JAVA_TOOL_OPTIONS: "-Xmx4g"
-      LOG_LEVEL: "debug"
       ENFORCE_REFERENTIAL_INTEGRITY: "false"
     volumes:
       - "blaze-data:/app/data"
diff --git a/ccp/modules/dnpm-compose.yml b/ccp/modules/dnpm-compose.yml
index 336ae1c9..87f27442 100644
--- a/ccp/modules/dnpm-compose.yml
+++ b/ccp/modules/dnpm-compose.yml
@@ -6,7 +6,7 @@ services:
       APP_dnpm-connect_KEY: ${DNPM_BEAM_SECRET_SHORT}
   dnpm-beam-connect:
     depends_on: [ beam-proxy ]
-    image: docker.verbis.dkfz.de/cache/samply/beam-connect:dnpm
+    image: docker.verbis.dkfz.de/cache/samply/beam-connect:develop
     container_name: bridgehead-dnpm-beam-connect
     environment:
       PROXY_URL: http://beam-proxy:8081
@@ -18,6 +18,7 @@ services:
       HTTPS_PROXY: "http://forward_proxy:3128"
       NO_PROXY: beam-proxy,dnpm-backend
       RUST_LOG: ${RUST_LOG:-info}
+      NO_AUTH: "true"
     volumes:
       - /etc/bridgehead/dnpm/local_targets.json:/conf/connect_targets.json:ro
       - /etc/bridgehead/dnpm/central_targets.json:/conf/central_targets.json:ro
diff --git a/ccp/mtba-compose.yml b/ccp/modules/mtba-compose.yml
similarity index 100%
rename from ccp/mtba-compose.yml
rename to ccp/modules/mtba-compose.yml
diff --git a/ccp/modules/mtba-setup.sh b/ccp/modules/mtba-setup.sh
new file mode 100644
index 00000000..c0834b9e
--- /dev/null
+++ b/ccp/modules/mtba-setup.sh
@@ -0,0 +1,13 @@
+#!/bin/bash
+
+function mtbaSetup() {
+       # TODO: Check if ID-Management Module is activated!
+       if [ -n "$ENABLE_MTBA" ];then
+               log INFO "MTBA setup detected -- will start MTBA Service and CBioPortal."
+              if [ ! -n "$IDMANAGER_UPLOAD_APIKEY" ]; then
+                      log ERROR "Detected MTBA Module configuration but ID-Management Module seems not to be configured!"
+                      exit 1;
+              fi
+               OVERRIDE+=" -f ./$PROJECT/modules/mtba-compose.yml"
+       fi
+}
\ No newline at end of file
diff --git a/ccp/nngm-compose.yml b/ccp/modules/nngm-compose.yml
similarity index 87%
rename from ccp/nngm-compose.yml
rename to ccp/modules/nngm-compose.yml
index 47bfa709..e61532d6 100644
--- a/ccp/nngm-compose.yml
+++ b/ccp/modules/nngm-compose.yml
@@ -18,7 +18,12 @@ services:
       - "traefik.http.middlewares.connector_strip.stripprefix.prefixes=/nngm-connector"
       - "traefik.http.services.connector.loadbalancer.server.port=8080"
       - "traefik.http.routers.connector.tls=true"
-      - "traefik.http.routers.connector.middlewares=connector_strip,auth"
+      - "traefik.http.routers.connector.middlewares=connector_strip,auth-nngm"
     volumes:
       - nngm-rest:/var/log
 
+  traefik:
+    labels:
+      - "traefik.http.middlewares.auth-nngm.basicauth.users=${NNGM_AUTH}"
+
+
diff --git a/ccp/modules/nngm-setup.sh b/ccp/modules/nngm-setup.sh
new file mode 100644
index 00000000..3e31f591
--- /dev/null
+++ b/ccp/modules/nngm-setup.sh
@@ -0,0 +1,8 @@
+#!/bin/bash
+
+function nngmSetup() {
+	if [ -n "$NNGM_CTS_APIKEY" ]; then
+		log INFO "nNGM setup detected -- will start nNGM Connector."
+		OVERRIDE+=" -f ./$PROJECT/modules/nngm-compose.yml"
+	fi
+	}
diff --git a/ccp/nngm-setup.sh b/ccp/nngm-setup.sh
deleted file mode 100644
index bcc4cd1f..00000000
--- a/ccp/nngm-setup.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/bash
-##nNGM vars:
-#NNGM_MAGICPL_APIKEY
-#NNGM_CTS_APIKEY
-#NNGM_CRYPTKEY
-
-function nngmSetup() {
-	if [ -n "$NNGM_CTS_APIKEY" ]; then
-		log INFO "nNGM setup detected -- will start nNGM Connector."
-		OVERRIDE+=" -f ./$PROJECT/nngm-compose.yml"
-	fi
-	}
-
-function mtbaSetup() {
-	# TODO: Check if ID-Management Module is activated!
-	if [ -n "$ENABLE_MTBA" ];then
-		log INFO "MTBA setup detected -- will start MTBA Service and CBioPortal."
-		if [ ! -n "$IDMANAGER_UPLOAD_APIKEY" ]; then
-			log ERROR "Detected MTBA Module configuration but ID-Management Module seems not to be configured!"
-			exit 1;
-		fi
-		OVERRIDE+=" -f ./$PROJECT/mtba-compose.yml"
-	fi
-}
diff --git a/ccp/root.crt.pem b/ccp/root.crt.pem
index b5612181..100011d5 100644
--- a/ccp/root.crt.pem
+++ b/ccp/root.crt.pem
@@ -1,20 +1,20 @@
 -----BEGIN CERTIFICATE-----
-MIIDNTCCAh2gAwIBAgIUMeGRSrNPhRdQ1tU7uK5+lUa4f38wDQYJKoZIhvcNAQEL
-BQAwFjEUMBIGA1UEAxMLQnJva2VyLVJvb3QwHhcNMjIwOTI5MTQxMjU1WhcNMzIw
-OTI2MTQxMzI1WjAWMRQwEgYDVQQDEwtCcm9rZXItUm9vdDCCASIwDQYJKoZIhvcN
-AQEBBQADggEPADCCAQoCggEBAMYyroOUeb27mYzClOrjCmgIceLalsFA0aVCh5mZ
-KtP8+1U3oq/7exP30gXiJojxW7xoerfyQY9s0Sz5YYbxYbuskFOYEtyAILB/pxgd
-+k+J3tlZKolpfmo7WT5tZiHxH/zjrtAYGnuB2xPHRMCWh/tHYrELgXQuilNol24y
-GBa1plTlARy0aKEDUHp87WLhD2qH7B8sFlLgo0+gunE1UtR2HMSPF45w3VXszyG6
-fJNrAj0yPnKy3Dm1BMO3jDO2e0A9lCQ71a4j4TeKePfCk1xCArSu6PpiwiacKplF
-c6CRR6KrWVm2g+8Y2hFcOBG/Py2xusm3PWbpylGq6vtFRkkCAwEAAaN7MHkwDgYD
-VR0PAQH/BAQDAgEGMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFEFxD6BQwQO5
-xsJ+3cvZypsnh6dDMB8GA1UdIwQYMBaAFEFxD6BQwQO5xsJ+3cvZypsnh6dDMBYG
-A1UdEQQPMA2CC0Jyb2tlci1Sb290MA0GCSqGSIb3DQEBCwUAA4IBAQB5zTeIhV/3
-3Am6O144EFtnIeaZ2w0D6aEHqHAZp50vJv3+uQfOliCOzgw7VDxI4Zz2JALjlR/i
-uOYHsu3YIRMIOmPOjqrdDJa6auB0ufL4oUPfCRln7Fh0f3JVlz3BUoHsSDt949p4
-g0nnsciL2JHuzlqjn7Jyt3L7dAHrlFKulCcuidG5D3cqXrRCbF83f+k3TC/HRiNd
-25oMi7I4MP/SOCdfQGUGIsHIf/0hSm3pNjDOrC/XuI/8gh2f5io+Y8V+hMwMBcm4
-JbH8bdyBB+EIhsNbTwf2MWntD5bmg47sf7hh23aNvKXI67Li1pTI2t1CqiGnFR0U
-fCEpeaEAHs0k
------END CERTIFICATE-----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+-----END CERTIFICATE-----
\ No newline at end of file
diff --git a/ccp/vars b/ccp/vars
index 61d5d2eb..0c80e8a9 100644
--- a/ccp/vars
+++ b/ccp/vars
@@ -1,4 +1,4 @@
-BROKER_ID=broker.dev.ccp-it.dktk.dkfz.de
+BROKER_ID=broker.ccp-it.dktk.dkfz.de
 BROKER_URL=https://${BROKER_ID}
 PROXY_ID=${SITE_ID}.${BROKER_ID}
 FOCUS_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
@@ -8,17 +8,13 @@ PRIVATEKEYFILENAME=/etc/bridgehead/pki/${SITE_ID}.priv.pem
 
 BROKER_URL_FOR_PREREQ=$BROKER_URL
 
-# This will load id-management setup. Effective only if id-management configuration is defined.
-source $PROJECT/modules/id-management-setup.sh
-idManagementSetup
-# This will load nngm setup. Effective only if nngm configuration is defined.
-source $PROJECT/nngm-setup.sh
-nngmSetup
-
-mtbaSetup
 
 for module in $PROJECT/modules/*.sh
 do
     log DEBUG "sourcing $module"
     source $module
 done
+
+idManagementSetup
+nngmSetup
+mtbaSetup
\ No newline at end of file
diff --git a/lib/functions.sh b/lib/functions.sh
index 48bc6509..97b75f82 100644
--- a/lib/functions.sh
+++ b/lib/functions.sh
@@ -9,14 +9,6 @@ detectCompose() {
 	fi
 }
 
-getLdmPassword() {
-	if [ -n "$LDM_PASSWORD" ]; then
-		docker run --rm docker.verbis.dkfz.de/cache/httpd:alpine htpasswd -nb $PROJECT $LDM_PASSWORD | tr -d '\n' | tr -d '\r'
-	else
-		echo -n ""
-	fi
-}
-
 exitIfNotRoot() {
   if [ "$EUID" -ne 0 ]; then
     log "ERROR" "Please run as root"
@@ -34,7 +26,7 @@ checkOwner(){
 }
 
 printUsage() {
-	echo "Usage: bridgehead start|stop|is-running|update|install|uninstall|enroll PROJECTNAME"
+	echo "Usage: bridgehead start|stop|is-running|update|install|uninstall|adduser|enroll PROJECTNAME"
 	echo "PROJECTNAME should be one of ccp|bbmri"
 }
 
@@ -196,10 +188,27 @@ function do_enroll_inner {
 		PARAMS+="--admin-email $SUPPORT_EMAIL"
 	fi
 
-	docker run --rm -ti -v /etc/bridgehead/pki:/etc/bridgehead/pki samply/beam-enroll:latest --output-file $PRIVATEKEYFILENAME --proxy-id $MANUAL_PROXY_ID $PARAMS
+	docker run --rm -v /etc/bridgehead/pki:/etc/bridgehead/pki samply/beam-enroll:latest --output-file $PRIVATEKEYFILENAME --proxy-id $MANUAL_PROXY_ID $PARAMS
 	chmod 600 $PRIVATEKEYFILENAME
 }
 
 function do_enroll {
 	do_enroll_inner $@
-}
\ No newline at end of file
+}
+
+add_basic_auth_user() {
+   USER="${1}"
+   PASSWORD="${2}"
+   NAME="${3}"
+   PROJECT="${4}"
+   FILE="/etc/bridgehead/${PROJECT}.local.conf"
+   ENCRY_CREDENTIALS="$(docker run --rm docker.verbis.dkfz.de/cache/httpd:alpine htpasswd -nb $USER $PASSWORD  | tr -d '\n' | tr -d '\r')"
+   if [ -f $FILE ] && grep -R -q "$NAME=" $FILE # if a specific basic auth user already exists:
+   then
+     sed -i "/$NAME/ s|='|='$ENCRY_CREDENTIALS,|" $FILE
+   else
+     echo -e "\n## Basic Authentication Credentials for:\n$NAME='$ENCRY_CREDENTIALS'" >> $FILE;
+   fi
+ 	log DEBUG "Saving clear text credentials in $FILE. If wanted, delete them manually."
+   sed -i "/^$NAME/ s|$|\n# User: $USER\n# Password: $PASSWORD|" $FILE
+}
diff --git a/lib/install-bridgehead.sh b/lib/install-bridgehead.sh
index c42119f6..38c38749 100755
--- a/lib/install-bridgehead.sh
+++ b/lib/install-bridgehead.sh
@@ -29,12 +29,16 @@ bridgehead ALL= NOPASSWD: BRIDGEHEAD${PROJECT^^}
 EOF
 
 # TODO: Determine whether this should be located in setup-bridgehead (triggered through bridgehead install) or in update bridgehead (triggered every hour)
-if [ -z "$LDM_PASSWORD" ]; then
-  log "INFO" "Now generating a password for the local data management. Please save the password for your ETL process!"
+if [ -z "$LDM_AUTH" ]; then
+  log "INFO" "Now generating basic auth for the local data management (see adduser in bridgehead for more information). "
   generated_passwd="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 32)"
+  add_basic_auth_user $PROJECT $generated_passwd "LDM_AUTH" $PROJECT
+fi
 
-  log "INFO" "Your generated credentials are:\n            user: $PROJECT\n            password: $generated_passwd"
-  echo -e "## Local Data Management Basic Authentication\n# User: $PROJECT\nLDM_PASSWORD=$generated_passwd" >> /etc/bridgehead/${PROJECT}.local.conf;
+if [ ! -z "$NNGM_CTS_APIKEY" ] && [ -z "$NNGM_AUTH" ]; then
+  log "INFO" "Now generating basic auth for nNGM upload API (see adduser in bridgehead for more information). "
+  generated_passwd="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 32)"
+  add_basic_auth_user "nngm" $generated_passwd "NNGM_AUTH" $PROJECT
 fi
 
 log "INFO" "Registering system units for bridgehead and bridgehead-update"
diff --git a/lib/update-bridgehead.sh b/lib/update-bridgehead.sh
index 89db3694..aea043a7 100755
--- a/lib/update-bridgehead.sh
+++ b/lib/update-bridgehead.sh
@@ -139,6 +139,15 @@ else
   log WARN "Automated backups are disabled (variable AUTO_BACKUPS != \"true\")"
 fi
 
+#TODO: the following block can be deleted after successful update at all sites
+if [ ! -z "$LDM_PASSWORD" ]; then
+  FILE="/etc/bridgehead/$PROJECT.local.conf"
+  log "INFO" "Migrating LDM_PASSWORD to encrypted credentials in $FILE"
+  add_basic_auth_user $PROJECT $LDM_PASSWORD "LDM_AUTH" $PROJECT
+  add_basic_auth_user $PROJECT $LDM_PASSWORD "NNGM_AUTH" $PROJECT
+  sed -i "/LDM_PASSWORD/{d;}" $FILE
+fi
+
 exit 0
 
 # TODO: Print last commit explicit
diff --git a/minimal/docker-compose.yml b/minimal/docker-compose.yml
index e941350d..c0eb3530 100644
--- a/minimal/docker-compose.yml
+++ b/minimal/docker-compose.yml
@@ -21,7 +21,7 @@ services:
       - "traefik.http.routers.dashboard.service=api@internal"
       - "traefik.http.routers.dashboard.tls=true"
       - "traefik.http.routers.dashboard.middlewares=auth"
-      - "traefik.http.middlewares.auth.basicauth.users=${LDM_LOGIN}"
+      - "traefik.http.middlewares.auth.basicauth.users=${LDM_AUTH}"
     ports:
       - 80:80
       - 443:443
diff --git a/minimal/modules/dnpm-compose.yml b/minimal/modules/dnpm-compose.yml
index 549ed912..adf04a43 100644
--- a/minimal/modules/dnpm-compose.yml
+++ b/minimal/modules/dnpm-compose.yml
@@ -22,7 +22,7 @@ services:
 
   dnpm-beam-connect:
     depends_on: [ dnpm-beam-proxy ]
-    image: docker.verbis.dkfz.de/cache/samply/beam-connect:dnpm
+    image: docker.verbis.dkfz.de/cache/samply/beam-connect:develop
     container_name: bridgehead-dnpm-beam-connect
     environment:
       PROXY_URL: http://dnpm-beam-proxy:8081
@@ -34,6 +34,7 @@ services:
       HTTPS_PROXY: http://forward_proxy:3128
       NO_PROXY: dnpm-beam-proxy,dnpm-backend
       RUST_LOG: ${RUST_LOG:-info}
+      NO_AUTH: "true"
     volumes:
       - /etc/bridgehead/dnpm/local_targets.json:/conf/connect_targets.json:ro
       - /etc/bridgehead/dnpm/central_targets.json:/conf/central_targets.json:ro