Make config consistent across projects

Co-authored-by: Martin Lablans <6804500+lablans@users.noreply.github.com>

.gitignore

@@ -4,3 +4,6 @@ site-config/*
 
 ## Ignore site configuration
 */docker-compose.override.yml
+
+## MAC OS
+.DS_Store

README.md

@@ -21,6 +21,7 @@ This repository is the starting point for any information and tools you will nee
     - [HTTPS Access](#https-access)
     - [TLS terminating proxies](#tls-terminating-proxies)
     - [File structure](#file-structure)
+    - [BBMRI-ERIC Directory entry needed](#bbmri-eric-directory-entry-needed)
 4. [Things you should know](#things-you-should-know)
     - [Auto-Updates](#auto-updates)
     - [Auto-Backups](#auto-backups)
@@ -55,9 +56,17 @@ We recommend to install Docker(-compose) from its official sources as described
 
 Note for Ubuntu: Please note that snap versions of Docker are not supported.
 
+Note for git and Docker: if you have a local proxy, you will need to adjust your setup appropriately, see [git proxy](https://gist.github.com/evantoli/f8c23a37eb3558ab8765) and [docker proxy](https://docs.docker.com/network/proxy/).
+
 ### Network
 
-Since it needs to carry sensitive patient data, Bridgeheads are intended to be deployed within your institution's secure network and behave well even in networks in strict security settings, e.g. firewall rules. The only connectivity required is an outgoing HTTPS proxy. TLS termination is supported, too (see [below](#tls-terminating-proxies))
+A running Bridgehead requires an outgoing HTTPS proxy to communicate with the central components.
+
+Additionally, your site might use its own proxy. You should discuss this with your local systems administration. If a proxy is being used, you will need to note down the URL of the proxy. If it is a secure proxy, then you will also need to make a note of its username and password. This information will be used later on during the installation process.
+
+Note that git and Docker may also need to be configured to use this proxy. This is a job for your systems administrators.
+
+If there is a site firewall, this needs to be configured so that outgoing calls to the following URLs are allowed: *.dkfz.de, github.com, docker.io, *.docker.io, *.samply.de.
 
 Note for Ubuntu: Please note that the uncomplicated firewall (ufw) is known to conflict with Docker [here](https://github.com/chaifeng/ufw-docker).
 
@@ -140,7 +149,7 @@ cd /srv/docker/bridgehead
 sudo ./bridgehead enroll <PROJECT>
 ```
 
-... and follow the instructions on the screen. You should then be prompted to do the next step:
+... and follow the instructions on the screen. Please send your default Collection ID and the display name of your site together with the certificate request when you enroll. You should then be prompted to do the next step:
 
 ### Starting and stopping your Bridgehead
 
@@ -228,6 +237,21 @@ Even within your internal network, the Bridgehead enforces HTTPS for all service
 
 All of the Bridgehead's outgoing connections are secured by transport encryption (TLS) and a Bridgehead will refuse to connect if certificate verification fails. If your local forward proxy server performs TLS termination, please place its CA certificate in `/etc/bridgehead/trusted-ca-certs` as a `.pem` file, e.g. `/etc/bridgehead/trusted-ca-certs/mylocalca.pem`. Then, all Bridgehead components will pick up this certificate and trust it for outgoing connections.
 
+To find the certificate file, first run the following:
+
+```
+curl -v https://broker.bbmri.samply.de/v1/health
+```
+
+In the output, look out for the line:
+
+
+```
+successfully set certificate verify locations:
+```
+
+Here a file will be mentioned, perhaps in the directory /etc/ssl/certs. The exact location  will depend on your operating system. This is the file that you need to copy.
+
 ### File structure
 
 - `/srv/docker/bridgehead` contains this git repository with the shell scripts and *project-specific configuration*. In here, all files are identical for all sites. You should not make any changes here.
@@ -240,26 +264,33 @@ All of the Bridgehead's outgoing connections are secured by transport encryption
 
 Your Bridgehead's actual data is not stored in the above directories, but in named docker volumes, see `docker volume ls` and `docker volume inspect <volume_name>`.
 
-### Directory sync
+### BBMRI-ERIC Directory entry needed
 
-This is an optional feature for bbmri projects. It keeps the [BBMRI Directory](https://directory.bbmri-eric.eu/) up to date with your local data eg. number of samples. It also updates the local FHIR store with the latest contact details etc. from the Directory.  You must explicitly set your country specific directory url, username and password to enable this feature.
+If you run a biobank, you should be listed together with your collections with in the [Directory](https://directory.bbmri-eric.eu), a BBMRI-ERIC project that catalogs biobanks.
+
+To do this, contact the BBMRI-ERIC national node for the country where your biobank is based, see [the list of nodes](http://www.bbmri-eric.eu/national-nodes/).
+
+Once you have added your biobank to the Directory you got persistent identifier (PID) for your biobank and unique identifiers (IDs) for your collections. The collection IDs are necessary for the biospecimens assigning to the collections and later in the data flows between BBMRI-ERIC tools. In case you cannot distribute all your biospecimens within collections via assigning the collection IDs, **you should choose one of your sample collections as a default collection for your biobank**. This collection will be automatically used to label any samples that have not been assigned a collection ID in your ETL process. Make a note of this default collection ID, you will need it later on in the installation process.
+
+### Directory sync tool
+
+The Bridgehead's **Directory Sync** is an optional feature that keeps the Directory up to date with your local data, e.g. number of samples. Conversely, it also updates the local FHIR store with the latest contact details etc. from the Directory. You must explicitly set your country specific directory URL, username and password to enable this feature.
 
 Full details can be found in [directory_sync_service](https://github.com/samply/directory_sync_service).
 
 To enable it, you will need to set these variables to the ```bbmri.conf``` file of your GitLab repository. Here is an example config:
 
 ```
-### Directory sync service
 DS_DIRECTORY_URL=https://directory.bbmri-eric.eu
 DS_DIRECTORY_USER_NAME=your_directory_username
 DS_DIRECTORY_USER_PASS=qwdnqwswdvqHBVGFR9887
 DS_TIMER_CRON="0 22 * * *"
 ```
-You must contact the Directory for your national node to find the URL, and to register as a user.
+You must contact the Directory team for your national node to find the URL, and to register as a user.
 
 Additionally, you should choose when you want Directory sync to run. In the example above, this is set to happen at 10 pm every evening. You can modify this to suit your requirements. The timer specification should follow the [cron](https://crontab.guru) convention.
 
-Once you edited the gitlab config. The bridgehead will autoupdate the config with the values and will sync the data.
+Once you edited the gitlab config, the bridgehead will autoupdate the config with the values and will sync the data.
 
 There will be a delay before the effects of Directory sync become visible. First, you will need to wait until the time you have specified in ```TIMER_CRON```. Second, the information will then be synchronized from your national node with the central European Directory. This can take up to 24 hours.
 
@@ -269,7 +300,7 @@ There will be a delay before the effects of Directory sync become visible. First
 
 Your Bridgehead will automatically and regularly check for updates. Whenever something has been updates (e.g., one of the git repositories or one of the docker images), your Bridgehead is automatically restarted. This should happen automatically and does not need any configuration.
 
-If you would like to understand what happens exactly and when, please check the systemd units deployed during the [installation](#base-installation) via `systemctl cat bridgehead-update@<PROJECT>.service` and `systemctl cat bridgehead-update@<PROJECT.timer`.
+If you would like to understand what happens exactly and when, please check the systemd units deployed during the [installation](#base-installation) via `systemctl cat bridgehead-update@<PROJECT>.service` and `systemctl cat bridgehead-update@<PROJECT>.timer`.
 
 ### Auto-Backups
 

bbmri/directory-sync.sh

@@ -1,8 +0,0 @@
-#!/bin/bash
-
-function dirSetup() {
-	if [ -n "$DS_DIRECTORY_USER_NAME" ]; then
-		log INFO "Directory sync setup detected -- will start directory sync service."
-		OVERRIDE+=" -f ./$PROJECT/directory-sync-compose.yml"
-	fi
-}

bbmri/docker-compose.yml

@@ -1,60 +1,10 @@
 version: "3.7"
 
+# This includes only the shared persistence for BBMRI-ERIC and GBN. Federation components are included as modules, see vars.
+
 services:
-  traefik:
-    container_name: bridgehead-traefik
-    image: docker.verbis.dkfz.de/cache/traefik:latest
-    command:
-      - --entrypoints.web.address=:80
-      - --entrypoints.websecure.address=:443
-      - --providers.docker=true
-      - --providers.docker.exposedbydefault=false
-      - --providers.file.directory=/configuration/
-      - --api.dashboard=true
-      - --accesslog=true
-      - --entrypoints.web.http.redirections.entrypoint.to=websecure
-      - --entrypoints.web.http.redirections.entrypoint.scheme=https
-    labels:
-      - "traefik.enable=true"
-      - "traefik.http.routers.dashboard.rule=PathPrefix(`/api`) || PathPrefix(`/dashboard`)"
-      - "traefik.http.routers.dashboard.entrypoints=websecure"
-      - "traefik.http.routers.dashboard.service=api@internal"
-      - "traefik.http.routers.dashboard.tls=true"
-      - "traefik.http.routers.dashboard.middlewares=auth"
-      - "traefik.http.middlewares.auth.basicauth.users=${LDM_LOGIN}"
-    ports:
-      - 80:80
-      - 443:443
-    volumes:
-      - /etc/bridgehead/traefik-tls:/certs:ro
-      - ../lib/traefik-configuration/:/configuration:ro
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-  forward_proxy:
-    container_name: bridgehead-forward-proxy
-    image: docker.verbis.dkfz.de/cache/samply/bridgehead-forward-proxy:latest
-    environment:
-      HTTPS_PROXY: ${HTTPS_PROXY_URL}
-      USERNAME: ${HTTPS_PROXY_USERNAME}
-      PASSWORD: ${HTTPS_PROXY_PASSWORD}
-    volumes:
-      - /etc/bridgehead/trusted-ca-certs:/docker/custom-certs/:ro
-
-  landing:
-    container_name: bridgehead-landingpage
-    image: docker.verbis.dkfz.de/cache/samply/bridgehead-landingpage:master
-    labels:
-      - "traefik.enable=true"
-      - "traefik.http.routers.landing.rule=PathPrefix(`/`)"
-      - "traefik.http.services.landing.loadbalancer.server.port=80"
-      - "traefik.http.routers.landing.tls=true"
-    environment:
-      HOST: ${HOST}
-      PROJECT: ${PROJECT}
-      SITE_NAME: ${SITE_NAME}
-
   blaze:
-    image: docker.verbis.dkfz.de/cache/samply/blaze:0.19
+    image: docker.verbis.dkfz.de/cache/samply/blaze:latest
     container_name: bridgehead-bbmri-blaze
     environment:
       BASE_URL: "http://bridgehead-bbmri-blaze:8080"
@@ -71,43 +21,10 @@ services:
       - "traefik.http.routers.blaze_ccp.middlewares=ccp_b_strip,auth"
       - "traefik.http.routers.blaze_ccp.tls=true"
 
-  focus:
-    image: docker.verbis.dkfz.de/cache/samply/focus:develop
-    container_name: bridgehead-focus
-    environment:
-      API_KEY: ${FOCUS_BEAM_SECRET_SHORT}
-      BEAM_APP_ID_LONG: focus.${PROXY_ID}
-      PROXY_ID: ${PROXY_ID}
-      BLAZE_URL: "http://bridgehead-bbmri-blaze:8080/fhir/"
-      BEAM_PROXY_URL: http://beam-proxy:8081
-      RETRY_COUNT: ${FOCUS_RETRY_COUNT}
-    depends_on:
-      - "beam-proxy"
-      - "blaze"
-
-  beam-proxy:
-    image: docker.verbis.dkfz.de/cache/samply/beam-proxy:develop
-    container_name: bridgehead-beam-proxy
-    environment:
-      BROKER_URL: ${BROKER_URL}
-      PROXY_ID: ${PROXY_ID}
-      APP_0_ID: focus
-      APP_0_KEY: ${FOCUS_BEAM_SECRET_SHORT}
-      PRIVKEY_FILE: /run/secrets/proxy.pem
-      ALL_PROXY: http://forward_proxy:3128
-      TLS_CA_CERTIFICATES_DIR: /conf/trusted-ca-certs
-      ROOTCERT_FILE: /conf/root.crt.pem
-    secrets:
-      - proxy.pem
-    depends_on:
-      - "forward_proxy"
-    volumes:
-      - /etc/bridgehead/trusted-ca-certs:/conf/trusted-ca-certs:ro
-      - ./root.crt.pem:/conf/root.crt.pem:ro
-
 volumes:
   blaze-data:
 
+# used in modules *-locator.yml
 secrets:
   proxy.pem:
     file: /etc/bridgehead/pki/${SITE_ID}.priv.pem

bbmri/modules/directory-sync.sh

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+if [ -n "${DS_DIRECTORY_USER_NAME}" ]; then
+	log INFO "Directory sync setup detected -- will start directory sync service."
+	OVERRIDE+=" -f ./$PROJECT/modules/directory-sync-compose.yml"
+fi

bbmri/modules/dnpm-compose.yml

@@ -0,0 +1,51 @@
+version: "3.7"
+
+services:
+  dnpm-beam-proxy:
+    image: docker.verbis.dkfz.de/cache/samply/beam-proxy:develop
+    container_name: bridgehead-dnpm-beam-proxy
+    environment:
+      BROKER_URL: ${DNPM_BROKER_URL}
+      PROXY_ID: ${DNPM_PROXY_ID}
+      APP_dnpm-connect_KEY: ${DNPM_BEAM_SECRET_SHORT}
+      PRIVKEY_FILE: /run/secrets/proxy.pem
+      ALL_PROXY: http://forward_proxy:3128
+      TLS_CA_CERTIFICATES_DIR: /conf/trusted-ca-certs
+      ROOTCERT_FILE: /conf/root.crt.pem
+    secrets:
+      - proxy.pem
+    depends_on:
+      - "forward_proxy"
+    volumes:
+      - /etc/bridgehead/trusted-ca-certs:/conf/trusted-ca-certs:ro
+      - /srv/docker/bridgehead/ccp/root-new.crt.pem:/conf/root.crt.pem:ro
+
+  dnpm-beam-connect:
+    depends_on: [ dnpm-beam-proxy ]
+    image: docker.verbis.dkfz.de/cache/samply/beam-connect:develop
+    container_name: bridgehead-dnpm-beam-connect
+    environment:
+      PROXY_URL: http://dnpm-beam-proxy:8081
+      PROXY_APIKEY: ${DNPM_BEAM_SECRET_SHORT}
+      APP_ID: dnpm-connect.${DNPM_PROXY_ID}
+      DISCOVERY_URL: "./conf/central_targets.json"
+      LOCAL_TARGETS_FILE: "./conf/connect_targets.json"
+      HTTP_PROXY: http://forward_proxy:3128
+      HTTPS_PROXY: http://forward_proxy:3128
+      NO_PROXY: dnpm-beam-proxy,dnpm-backend
+      RUST_LOG: ${RUST_LOG:-info}
+      NO_AUTH: "true"
+    volumes:
+      - /etc/bridgehead/dnpm/local_targets.json:/conf/connect_targets.json:ro
+      - /etc/bridgehead/dnpm/central_targets.json:/conf/central_targets.json:ro
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.dnpm-connect.rule=PathPrefix(`/dnpm-connect`)"
+      - "traefik.http.middlewares.dnpm-connect-strip.stripprefix.prefixes=/dnpm-connect"
+      - "traefik.http.routers.dnpm-connect.middlewares=dnpm-connect-strip"
+      - "traefik.http.services.dnpm-connect.loadbalancer.server.port=8062"
+      - "traefik.http.routers.dnpm-connect.tls=true"
+
+secrets:
+  proxy.pem:
+    file: /etc/bridgehead/pki/${SITE_ID}.priv.pem

bbmri/modules/dnpm-setup.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+if [ -n "${ENABLE_DNPM}" ]; then
+	log INFO "DNPM setup detected (Beam.Connect) -- will start Beam and Beam.Connect for DNPM."
+	OVERRIDE+=" -f ./$PROJECT/modules/dnpm-compose.yml"
+
+	# Set variables required for Beam-Connect
+	DNPM_APPLICATION_SECRET="$(echo \"This is a salt string to generate one consistent password for DNPM. It is not required to be secret.\" | openssl pkeyutl -sign -inkey /etc/bridgehead/pki/${SITE_ID}.priv.pem | base64 | head -c 30)"
+	DNPM_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+	DNPM_BROKER_ID="broker.ccp-it.dktk.dkfz.de"
+	DNPM_BROKER_URL="https://${DNPM_BROKER_ID}"
+	DNPM_PROXY_ID="${SITE_ID}.${DNPM_BROKER_ID}"
+fi

bbmri/modules/eric-compose.yml

@@ -0,0 +1,46 @@
+version: "3.7"
+
+services:
+  focus-eric:
+    image: docker.verbis.dkfz.de/cache/samply/focus:main
+    container_name: bridgehead-focus-eric
+    environment:
+      API_KEY: ${ERIC_FOCUS_BEAM_SECRET_SHORT}
+      BEAM_APP_ID_LONG: focus.${ERIC_PROXY_ID}
+      PROXY_ID: ${ERIC_PROXY_ID}
+      BLAZE_URL: "http://blaze:8080/fhir/"
+      BEAM_PROXY_URL: http://beam-proxy-eric:8081
+      RETRY_COUNT: ${FOCUS_RETRY_COUNT}
+    depends_on:
+      - "beam-proxy-eric"
+      - "blaze"
+
+  beam-proxy-eric:
+    image: docker.verbis.dkfz.de/cache/samply/beam-proxy:develop
+    container_name: bridgehead-beam-proxy-eric
+    environment:
+      BROKER_URL: ${ERIC_BROKER_URL}
+      PROXY_ID: ${ERIC_PROXY_ID}
+      APP_focus_KEY: ${ERIC_FOCUS_BEAM_SECRET_SHORT}
+      APP_monitoring_KEY: ${ERIC_MONITORING_BEAM_SECRET_SHORT}
+      PRIVKEY_FILE: /run/secrets/proxy.pem
+      ALL_PROXY: http://forward_proxy:3128
+      TLS_CA_CERTIFICATES_DIR: /conf/trusted-ca-certs
+      ROOTCERT_FILE: /conf/root.crt.pem
+    secrets:
+      - proxy.pem
+    depends_on:
+      - "forward_proxy"
+    volumes:
+      - /etc/bridgehead/trusted-ca-certs:/conf/trusted-ca-certs:ro
+      - /srv/docker/bridgehead/bbmri/modules/eric.root.crt.pem:/conf/root.crt.pem:ro
+
+  bridgehead-monitoring:
+    image: docker.verbis.dkfz.de/cache/samply/bridgehead-monitoring:latest
+    container_name: bridgehead-monitoring-eric
+    environment:
+      - BEAM_ID=monitoring.${ERIC_PROXY_ID}
+      - BEAM_API_KEY=${ERIC_MONITORING_BEAM_SECRET_SHORT}
+      - BEAM_PROXY_URL=http://beam-proxy-eric:8081
+    depends_on:
+      - beam-proxy-eric

bbmri/modules/eric-setup.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+if [ "${ENABLE_ERIC}" == "true" ]; then
+	log INFO "BBMRI-ERIC setup detected -- will start services for BBMRI-ERIC."
+	OVERRIDE+=" -f ./$PROJECT/modules/eric-compose.yml"
+
+	# Set required variables
+	ERIC_BROKER_ID=broker.bbmri.samply.de
+	ERIC_BROKER_URL=https://${ERIC_BROKER_ID}
+	ERIC_PROXY_ID=${SITE_ID}.${ERIC_BROKER_ID}
+	ERIC_FOCUS_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+	ERIC_SUPPORT_EMAIL=bridgehead@helpdesk.bbmri-eric.eu
+
+	#Monitoring
+	ERIC_MONITORING_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+fi

bbmri/modules/gbn-compose.yml

@@ -0,0 +1,47 @@
+version: "3.7"
+
+services:
+  focus-gbn:
+    image: docker.verbis.dkfz.de/cache/samply/focus:main
+    container_name: bridgehead-focus-gbn
+    environment:
+      API_KEY: ${GBN_FOCUS_BEAM_SECRET_SHORT}
+      BEAM_APP_ID_LONG: focus.${GBN_PROXY_ID}
+      PROXY_ID: ${GBN_PROXY_ID}
+      BLAZE_URL: "http://blaze:8080/fhir/"
+      BEAM_PROXY_URL: http://beam-proxy-gbn:8081
+      RETRY_COUNT: ${FOCUS_RETRY_COUNT}
+    depends_on:
+      - "beam-proxy-gbn"
+      - "blaze"
+
+  beam-proxy-gbn:
+    image: docker.verbis.dkfz.de/cache/samply/beam-proxy:develop
+    container_name: bridgehead-beam-proxy-gbn
+    environment:
+      BROKER_URL: ${GBN_BROKER_URL}
+      PROXY_ID: ${GBN_PROXY_ID}
+      APP_focus_KEY: ${GBN_FOCUS_BEAM_SECRET_SHORT}
+      APP_monitoring_KEY: ${GBN_MONITORING_BEAM_SECRET_SHORT}
+      PRIVKEY_FILE: /run/secrets/proxy.pem
+      ALL_PROXY: http://forward_proxy:3128
+      TLS_CA_CERTIFICATES_DIR: /conf/trusted-ca-certs
+      ROOTCERT_FILE: /conf/root.crt.pem
+    secrets:
+      - proxy.pem
+    depends_on:
+      - "forward_proxy"
+    volumes:
+      - /etc/bridgehead/trusted-ca-certs:/conf/trusted-ca-certs:ro
+      - /srv/docker/bridgehead/bbmri/modules/gbn.root.crt.pem:/conf/root.crt.pem:ro
+
+  bridgehead-monitoring:
+    image: docker.verbis.dkfz.de/cache/samply/bridgehead-monitoring:latest
+    container_name: bridgehead-monitoring-gbn
+    environment:
+      - BEAM_ID=monitoring.${GBN_PROXY_ID}
+      - BEAM_API_KEY=${GBN_MONITORING_BEAM_SECRET_SHORT}
+      - BEAM_PROXY_URL=http://beam-proxy-gbn:8081
+    depends_on:
+      - beam-proxy-gbn
+

bbmri/modules/gbn-setup.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+if [ "${ENABLE_GBN}" == "true" ]; then
+	log INFO "GBN setup detected -- will start services for German Biobank Node."
+	OVERRIDE+=" -f ./$PROJECT/modules/gbn-compose.yml"
+
+	# Set required variables
+	GBN_BROKER_ID=broker.bbmri.de
+	GBN_BROKER_URL=https://${GBN_BROKER_ID}
+	GBN_PROXY_ID=${SITE_ID}.${GBN_BROKER_ID}
+	GBN_FOCUS_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+	GBN_SUPPORT_EMAIL=feedback@germanbiobanknode.de
+
+	#Monitoring
+	GBN_MONITORING_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+fi

bbmri/modules/gbn.root.crt.pem

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

bbmri/vars

@@ -1,11 +1,37 @@
-BROKER_ID=broker.bbmri.samply.de
-BROKER_URL=https://${BROKER_ID}
-PROXY_ID=${SITE_ID}.${BROKER_ID}
-FOCUS_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+# Makes sense for all European Biobanks
+: ${ENABLE_ERIC:=true}
+
+# Makes only sense for German Biobanks
+: ${ENABLE_GBN:=false}
+
 FOCUS_RETRY_COUNT=32
-SUPPORT_EMAIL=bridgehead@helpdesk.bbmri-eric.eu
 PRIVATEKEYFILENAME=/etc/bridgehead/pki/${SITE_ID}.priv.pem
 
-# This will load directory-sync setup.
-source $PROJECT/directory-sync.sh
-dirSetup
+for module in $PROJECT/modules/*.sh
+do
+    log DEBUG "sourcing $module"
+    source $module
+done
+
+SUPPORT_EMAIL=$ERIC_SUPPORT_EMAIL
+BROKER_URL_FOR_PREREQ=$ERIC_BROKER_URL
+
+if [ -n "$GBN_SUPPORT_EMAIL" ]; then
+    SUPPORT_EMAIL=$GBN_SUPPORT_EMAIL
+fi
+
+function do_enroll {
+    COUNT=0
+    if [ "$ENABLE_ERIC" == "true" ]; then
+        do_enroll_inner $ERIC_PROXY_ID $ERIC_SUPPORT_EMAIL
+        COUNT=$((COUNT+1))
+    fi
+    if [ "$ENABLE_GBN" == "true" ]; then
+        do_enroll_inner $GBN_PROXY_ID $GBN_SUPPORT_EMAIL
+        COUNT=$((COUNT+1))
+    fi
+    if [ $COUNT -ge 2 ]; then
+        echo
+        echo "You just received $COUNT certificate signing requests (CSR). Please send $COUNT e-mails, with 1 CSR each, to the respective e-mail address."
+    fi
+}

bridgehead

@@ -32,6 +32,9 @@ case "$PROJECT" in
 	bbmri)
 		#nothing extra to do
 		;;
+	minimal)
+		#nothing extra to do
+		;;
 	*)
 		printUsage
 		exit 1
@@ -51,6 +54,11 @@ loadVars() {
 	set +a
 
 	OVERRIDE=${OVERRIDE:=""}
+	# minimal contains shared components, so potential overrides must be applied in every project
+	if [ -f "minimal/docker-compose.override.yml" ]; then
+		log INFO "Applying Bridgehead common components override (minimal/docker-compose.override.yml)"
+		OVERRIDE+=" -f ./minimal/docker-compose.override.yml"
+	fi
 	if [ -f "$PROJECT/docker-compose.override.yml" ]; then
 		log INFO "Applying $PROJECT/docker-compose.override.yml"
 		OVERRIDE+=" -f ./$PROJECT/docker-compose.override.yml"
@@ -65,14 +73,13 @@ case "$ACTION" in
 		hc_send log "Bridgehead $PROJECT startup: Checking requirements ..."
 		checkRequirements
 		hc_send log "Bridgehead $PROJECT startup: Requirements checked out. Now starting bridgehead ..."
-		export LDM_LOGIN=$(getLdmPassword)
-		exec $COMPOSE -f ./$PROJECT/docker-compose.yml $OVERRIDE up --abort-on-container-exit
+		exec $COMPOSE -p $PROJECT -f ./minimal/docker-compose.yml -f ./$PROJECT/docker-compose.yml $OVERRIDE up --abort-on-container-exit
 		;;
 	stop)
 		loadVars
-		# HACK: This is tempoarily to properly shut down false bridgehead instances (bridgehead-ccp instead ccp)
-		$COMPOSE -p bridgehead-$PROJECT -f ./$PROJECT/docker-compose.yml $OVERRIDE down
-		exec $COMPOSE -f ./$PROJECT/docker-compose.yml $OVERRIDE down
+		# HACK: This is temporarily to properly shut down false bridgehead instances (bridgehead-ccp instead ccp)
+		$COMPOSE -p bridgehead-$PROJECT -f ./minimal/docker-compose.yml -f ./$PROJECT/docker-compose.yml $OVERRIDE down
+		exec $COMPOSE -p $PROJECT -f ./minimal/docker-compose.yml -f ./$PROJECT/docker-compose.yml $OVERRIDE down
 		;;
 	is-running)
 		bk_is_running
@@ -95,14 +102,17 @@ case "$ACTION" in
 	uninstall)
 		exec ./lib/uninstall-bridgehead.sh $PROJECT
 		;;
+	adduser)
+		loadVars
+		log "INFO" "Adding encrypted credentials in /etc/bridgehead/$PROJECT.local.conf"
+    		read -p "Please choose the component (LDM_AUTH|NNGM_AUTH) you want to add a user to : " COMPONENT
+    		read -p "Please enter a username: " USER
+    		read -s -p "Please enter a password (will not be echoed): "$'\n' PASSWORD
+    		add_basic_auth_user $USER $PASSWORD $COMPONENT $PROJECT
+		;;
 	enroll)
 		loadVars
-		if [ -e $PRIVATEKEYFILENAME ]; then
-			log ERROR "Private key already exists at $PRIVATEKEYFILENAME. Please delete first to proceed."
-			exit 1
-		fi
-		docker run --rm -ti -v /etc/bridgehead/pki:/etc/bridgehead/pki samply/beam-enroll:latest --output-file $PRIVATEKEYFILENAME --proxy-id $PROXY_ID --admin-email $SUPPORT_EMAIL
-		chmod 600 $PRIVATEKEYFILENAME
+		do_enroll $PROXY_ID
 		;;
 	preRun | preUpdate)
 		fixPermissions

ccp/docker-compose.yml

@@ -1,65 +1,12 @@
 version: "3.7"
 
 services:
-  traefik:
-    container_name: bridgehead-traefik
-    image: docker.verbis.dkfz.de/cache/traefik:latest
-    command:
-      - --entrypoints.web.address=:80
-      - --entrypoints.websecure.address=:443
-      - --providers.docker=true
-      - --providers.docker.exposedbydefault=false
-      - --providers.file.directory=/configuration/
-      - --api.dashboard=true
-      - --accesslog=true
-      - --entrypoints.web.http.redirections.entrypoint.to=websecure
-      - --entrypoints.web.http.redirections.entrypoint.scheme=https
-    labels:
-      - "traefik.enable=true"
-      - "traefik.http.routers.dashboard.rule=PathPrefix(`/api`) || PathPrefix(`/dashboard`)"
-      - "traefik.http.routers.dashboard.entrypoints=websecure"
-      - "traefik.http.routers.dashboard.service=api@internal"
-      - "traefik.http.routers.dashboard.tls=true"
-      - "traefik.http.routers.dashboard.middlewares=auth"
-      - "traefik.http.middlewares.auth.basicauth.users=${LDM_LOGIN}"
-    ports:
-      - 80:80
-      - 443:443
-    volumes:
-      - /etc/bridgehead/traefik-tls:/certs:ro
-      - ../lib/traefik-configuration/:/configuration:ro
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-  forward_proxy:
-    container_name: bridgehead-forward-proxy
-    image: docker.verbis.dkfz.de/cache/samply/bridgehead-forward-proxy:latest
-    environment:
-      HTTPS_PROXY: ${HTTPS_PROXY_URL}
-      USERNAME: ${HTTPS_PROXY_USERNAME}
-      PASSWORD: ${HTTPS_PROXY_PASSWORD}
-    volumes:
-      - /etc/bridgehead/trusted-ca-certs:/docker/custom-certs/:ro
-
-  landing:
-    container_name: bridgehead-landingpage
-    image: docker.verbis.dkfz.de/cache/samply/bridgehead-landingpage:master
-    labels:
-      - "traefik.enable=true"
-      - "traefik.http.routers.landing.rule=PathPrefix(`/`)"
-      - "traefik.http.services.landing.loadbalancer.server.port=80"
-      - "traefik.http.routers.landing.tls=true"
-    environment:
-      HOST: ${HOST}
-      PROJECT: ${PROJECT}
-      SITE_NAME: ${SITE_NAME}
-
   blaze:
-    image: docker.verbis.dkfz.de/cache/samply/blaze:0.19
+    image: docker.verbis.dkfz.de/cache/samply/blaze:latest
     container_name: bridgehead-ccp-blaze
     environment:
       BASE_URL: "http://bridgehead-ccp-blaze:8080"
       JAVA_TOOL_OPTIONS: "-Xmx4g"
-      LOG_LEVEL: "debug"
       ENFORCE_REFERENTIAL_INTEGRITY: "false"
     volumes:
       - "blaze-data:/app/data"
@@ -71,15 +18,17 @@ services:
       - "traefik.http.routers.blaze_ccp.middlewares=ccp_b_strip,auth"
       - "traefik.http.routers.blaze_ccp.tls=true"
 
-  spot:
-    image: docker.verbis.dkfz.de/cache/samply/spot:latest
-    container_name: bridgehead-spot
+  focus:
+    image: docker.verbis.dkfz.de/cache/samply/focus:main
+    container_name: bridgehead-focus
     environment:
-      SECRET: ${SPOT_BEAM_SECRET_LONG}
-      APPID: spot
+      API_KEY: ${FOCUS_BEAM_SECRET_SHORT}
+      BEAM_APP_ID_LONG: focus.${PROXY_ID}
       PROXY_ID: ${PROXY_ID}
-      LDM_URL: http://bridgehead-ccp-blaze:8080/fhir
-      BEAM_PROXY: http://beam-proxy:8081
+      BLAZE_URL: "http://bridgehead-ccp-blaze:8080/fhir/"
+      BEAM_PROXY_URL: http://beam-proxy:8081
+      RETRY_COUNT: ${FOCUS_RETRY_COUNT}
+      OBFUSCATE: "no"
     depends_on:
       - "beam-proxy"
       - "blaze"
@@ -90,10 +39,8 @@ services:
     environment:
       BROKER_URL: ${BROKER_URL}
       PROXY_ID: ${PROXY_ID}
-      APP_0_ID: spot
-      APP_0_KEY: ${SPOT_BEAM_SECRET_SHORT}
-      APP_1_ID: report-hub
-      APP_1_KEY: ${REPORTHUB_BEAM_SECRET_SHORT}
+      APP_focus_KEY: ${FOCUS_BEAM_SECRET_SHORT}
+      APP_monitoring_KEY: ${CCP_MONITORING_BEAM_SECRET_SHORT}
       PRIVKEY_FILE: /run/secrets/proxy.pem
       ALL_PROXY: http://forward_proxy:3128
       TLS_CA_CERTIFICATES_DIR: /conf/trusted-ca-certs
@@ -104,7 +51,17 @@ services:
       - "forward_proxy"
     volumes:
       - /etc/bridgehead/trusted-ca-certs:/conf/trusted-ca-certs:ro
-      - ./root.crt.pem:/conf/root.crt.pem:ro
+      - /srv/docker/bridgehead/ccp/root.crt.pem:/conf/root.crt.pem:ro
+  
+  bridgehead-monitoring:
+    image: docker.verbis.dkfz.de/cache/samply/bridgehead-monitoring:latest
+    container_name: bridgehead-monitoring-ccp
+    environment:
+      - BEAM_ID=monitoring.${PROXY_ID}
+      - BEAM_API_KEY=${CCP_MONITORING_BEAM_SECRET_SHORT}
+      - BEAM_PROXY_URL=http://beam-proxy:8081
+    depends_on:
+      - beam-proxy
 
 
 volumes:

ccp/exliquid-compose.yml

@@ -1,34 +0,0 @@
-version: "3.7"
-
-services:
-  exliquid-task-store:
-    image: docker.verbis.dkfz.de/cache/samply/blaze:0.19
-    container_name: bridgehead-exliquid-task-store
-    environment:
-      BASE_URL: "http://bridgehead-exliquid-task-store:8080"
-      JAVA_TOOL_OPTIONS: "-Xmx1g"
-    volumes:
-    - "exliquid-task-store-data:/app/data"
-    labels:
-      - "traefik.enable=false"
-
-  exliquid-report-hub:
-    image: docker.verbis.dkfz.de/cache/samply/report-hub:latest
-    container_name: bridgehead-exliquid-report-hub
-    environment:
-      SPRING_WEBFLUX_BASE_PATH: "/exliquid"
-      JAVA_TOOL_OPTIONS: "-Xmx1g"
-      APP_BEAM_APPID: "report-hub.${PROXY_ID}"
-      APP_BEAM_SECRET: ${REPORTHUB_BEAM_SECRET_SHORT}
-      APP_BEAM_PROXY_BASEURL: http://beam-proxy:8081
-      APP_TASKSTORE_BASEURL: "http://bridgehead-exliquid-task-store:8080/fhir"
-      APP_DATASTORE_BASEURL:  http://bridgehead-ccp-blaze:8080/fhir
-    restart: always
-    labels:
-      - "traefik.enable=true"
-      - "traefik.http.routers.report-ccp.rule=PathPrefix(`/exliquid`)"
-      - "traefik.http.services.report-ccp.loadbalancer.server.port=8080"
-      - "traefik.http.routers.report-ccp.tls=true"
-
-volumes:
-  exliquid-task-store-data:

ccp/exliquid-setup.sh

@@ -1,19 +0,0 @@
-#!/bin/bash
-
-function exliquidSetup() {
-	case ${SITE_ID} in
-		berlin|dresden|essen|frankfurt|freiburg|luebeck|mainz|muenchen-lmu|muenchen-tum|mannheim|tuebingen)
-			EXLIQUID=1
-			;;
-		dktk-test)
-			EXLIQUID=1
-			;;
-		*)
-			EXLIQUID=0
-			;;
-	esac
-	if [[ $EXLIQUID -eq 1 ]]; then
-		log INFO "EXLIQUID setup detected -- will start Report-Hub."
-		OVERRIDE+=" -f ./$PROJECT/exliquid-compose.yml"
-	fi
-}

ccp/modules/ccp-setup.sh

@@ -0,0 +1,2 @@
+#Monitoring
+CCP_MONITORING_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"

ccp/modules/dnpm-compose.yml

@@ -0,0 +1,31 @@
+version: "3.7"
+
+services:
+  beam-proxy:
+    environment:
+      APP_dnpm-connect_KEY: ${DNPM_BEAM_SECRET_SHORT}
+  dnpm-beam-connect:
+    depends_on: [ beam-proxy ]
+    image: docker.verbis.dkfz.de/cache/samply/beam-connect:develop
+    container_name: bridgehead-dnpm-beam-connect
+    environment:
+      PROXY_URL: http://beam-proxy:8081
+      PROXY_APIKEY: ${DNPM_BEAM_SECRET_SHORT}
+      APP_ID: dnpm-connect.${PROXY_ID}
+      DISCOVERY_URL: "./conf/central_targets.json"
+      LOCAL_TARGETS_FILE: "./conf/connect_targets.json"
+      HTTP_PROXY: "http://forward_proxy:3128"
+      HTTPS_PROXY: "http://forward_proxy:3128"
+      NO_PROXY: beam-proxy,dnpm-backend
+      RUST_LOG: ${RUST_LOG:-info}
+      NO_AUTH: "true"
+    volumes:
+      - /etc/bridgehead/dnpm/local_targets.json:/conf/connect_targets.json:ro
+      - /etc/bridgehead/dnpm/central_targets.json:/conf/central_targets.json:ro
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.dnpm-connect.rule=PathPrefix(`/dnpm-connect`)"
+      - "traefik.http.middlewares.dnpm-connect-strip.stripprefix.prefixes=/dnpm-connect"
+      - "traefik.http.routers.dnpm-connect.middlewares=dnpm-connect-strip"
+      - "traefik.http.services.dnpm-connect.loadbalancer.server.port=8062"
+      - "traefik.http.routers.dnpm-connect.tls=true"

ccp/modules/dnpm-setup.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+if [ -n "${ENABLE_DNPM}" ]; then
+	log INFO "DNPM setup detected (Beam.Connect) -- will start Beam.Connect for DNPM."
+	OVERRIDE+=" -f ./$PROJECT/modules/dnpm-compose.yml"
+
+	# Set variables required for Beam-Connect
+	DNPM_APPLICATION_SECRET="$(echo \"This is a salt string to generate one consistent password for DNPM. It is not required to be secret.\" | openssl pkeyutl -sign -inkey /etc/bridgehead/pki/${SITE_ID}.priv.pem | base64 | head -c 30)"
+	DNPM_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+fi

ccp/modules/id-management-compose.yml

@@ -5,6 +5,7 @@ services:
     container_name: bridgehead-id-manager
     environment:
       TOMCAT_REVERSEPROXY_FQDN: ${HOST}
+      TOMCAT_REVERSEPROXY_SSL: "true"
       MAGICPL_SITE: ${IDMANAGEMENT_FRIENDLY_ID}
       MAGICPL_ALLOWED_ORIGINS: https://${HOST}
       MAGICPL_LOCAL_PATIENTLIST_APIKEY: ${IDMANAGER_LOCAL_PATIENTLIST_APIKEY}

ccp/modules/id-management-setup.sh

@@ -6,7 +6,7 @@ function idManagementSetup() {
 		OVERRIDE+=" -f ./$PROJECT/modules/id-management-compose.yml"
 
 		# Auto Generate local Passwords
-		PATIENTLIST_POSTGRES_PASSWORD="$(echo \"id-management-module-db-password-salt\" | openssl rsautl -sign -inkey /etc/bridgehead/pki/${SITE_ID}.priv.pem | base64 | head -c 30)"
+		PATIENTLIST_POSTGRES_PASSWORD="$(echo \"id-management-module-db-password-salt\" | openssl pkeyutl -sign -inkey /etc/bridgehead/pki/${SITE_ID}.priv.pem | base64 | head -c 30)"
 		IDMANAGER_LOCAL_PATIENTLIST_APIKEY="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
 
 		# Transform Seeds Configuration to pass it to the Mainzelliste Container

ccp/modules/mtba-setup.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+function mtbaSetup() {
+       # TODO: Check if ID-Management Module is activated!
+       if [ -n "$ENABLE_MTBA" ];then
+               log INFO "MTBA setup detected -- will start MTBA Service and CBioPortal."
+              if [ ! -n "$IDMANAGER_UPLOAD_APIKEY" ]; then
+                      log ERROR "Detected MTBA Module configuration but ID-Management Module seems not to be configured!"
+                      exit 1;
+              fi
+               OVERRIDE+=" -f ./$PROJECT/modules/mtba-compose.yml"
+       fi
+}

ccp/modules/nngm-compose.yml

@@ -18,7 +18,12 @@ services:
       - "traefik.http.middlewares.connector_strip.stripprefix.prefixes=/nngm-connector"
       - "traefik.http.services.connector.loadbalancer.server.port=8080"
       - "traefik.http.routers.connector.tls=true"
-      - "traefik.http.routers.connector.middlewares=connector_strip,auth"
+      - "traefik.http.routers.connector.middlewares=connector_strip,auth-nngm"
     volumes:
       - nngm-rest:/var/log
 
+  traefik:
+    labels:
+      - "traefik.http.middlewares.auth-nngm.basicauth.users=${NNGM_AUTH}"
+
+

ccp/modules/nngm-setup.sh

@@ -0,0 +1,8 @@
+#!/bin/bash
+
+function nngmSetup() {
+	if [ -n "$NNGM_CTS_APIKEY" ]; then
+		log INFO "nNGM setup detected -- will start nNGM Connector."
+		OVERRIDE+=" -f ./$PROJECT/modules/nngm-compose.yml"
+	fi
+	}

ccp/nngm-setup.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-##nNGM vars:
-#NNGM_MAGICPL_APIKEY
-#NNGM_CTS_APIKEY
-#NNGM_CRYPTKEY
-
-function nngmSetup() {
-	if [ -n "$NNGM_CTS_APIKEY" ]; then
-		log INFO "nNGM setup detected -- will start nNGM Connector."
-		OVERRIDE+=" -f ./$PROJECT/nngm-compose.yml"
-	fi
-	}
-
-function mtbaSetup() {
-	# TODO: Check if ID-Management Module is activated!
-	if [ -n "$ENABLE_MTBA" ];then
-		log INFO "MTBA setup detected -- will start MTBA Service and CBioPortal."
-		if [ ! -n "$IDMANAGER_UPLOAD_APIKEY" ]; then
-			log ERROR "Detected MTBA Module configuration but ID-Management Module seems not to be configured!"
-			exit 1;
-		fi
-		OVERRIDE+=" -f ./$PROJECT/mtba-compose.yml"
-	fi
-}

ccp/root-new.crt.pem

@@ -0,0 +1,20 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

ccp/root.crt.pem

@@ -1,20 +1,20 @@
 -----BEGIN CERTIFICATE-----
-MIIDNTCCAh2gAwIBAgIUMeGRSrNPhRdQ1tU7uK5+lUa4f38wDQYJKoZIhvcNAQEL
-BQAwFjEUMBIGA1UEAxMLQnJva2VyLVJvb3QwHhcNMjIwOTI5MTQxMjU1WhcNMzIw
-OTI2MTQxMzI1WjAWMRQwEgYDVQQDEwtCcm9rZXItUm9vdDCCASIwDQYJKoZIhvcN
-AQEBBQADggEPADCCAQoCggEBAMYyroOUeb27mYzClOrjCmgIceLalsFA0aVCh5mZ
-KtP8+1U3oq/7exP30gXiJojxW7xoerfyQY9s0Sz5YYbxYbuskFOYEtyAILB/pxgd
-+k+J3tlZKolpfmo7WT5tZiHxH/zjrtAYGnuB2xPHRMCWh/tHYrELgXQuilNol24y
-GBa1plTlARy0aKEDUHp87WLhD2qH7B8sFlLgo0+gunE1UtR2HMSPF45w3VXszyG6
-fJNrAj0yPnKy3Dm1BMO3jDO2e0A9lCQ71a4j4TeKePfCk1xCArSu6PpiwiacKplF
-c6CRR6KrWVm2g+8Y2hFcOBG/Py2xusm3PWbpylGq6vtFRkkCAwEAAaN7MHkwDgYD
-VR0PAQH/BAQDAgEGMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFEFxD6BQwQO5
-xsJ+3cvZypsnh6dDMB8GA1UdIwQYMBaAFEFxD6BQwQO5xsJ+3cvZypsnh6dDMBYG
-A1UdEQQPMA2CC0Jyb2tlci1Sb290MA0GCSqGSIb3DQEBCwUAA4IBAQB5zTeIhV/3
-3Am6O144EFtnIeaZ2w0D6aEHqHAZp50vJv3+uQfOliCOzgw7VDxI4Zz2JALjlR/i
-uOYHsu3YIRMIOmPOjqrdDJa6auB0ufL4oUPfCRln7Fh0f3JVlz3BUoHsSDt949p4
-g0nnsciL2JHuzlqjn7Jyt3L7dAHrlFKulCcuidG5D3cqXrRCbF83f+k3TC/HRiNd
-25oMi7I4MP/SOCdfQGUGIsHIf/0hSm3pNjDOrC/XuI/8gh2f5io+Y8V+hMwMBcm4
-JbH8bdyBB+EIhsNbTwf2MWntD5bmg47sf7hh23aNvKXI67Li1pTI2t1CqiGnFR0U
-fCEpeaEAHs0k
------END CERTIFICATE-----
+MIIDNTCCAh2gAwIBAgIUN7yzueIZzwpe8PaPEIMY8zoH+eMwDQYJKoZIhvcNAQEL
+BQAwFjEUMBIGA1UEAxMLQnJva2VyLVJvb3QwHhcNMjMwNTIzMTAxNzIzWhcNMzMw
+NTIwMTAxNzUzWjAWMRQwEgYDVQQDEwtCcm9rZXItUm9vdDCCASIwDQYJKoZIhvcN
+AQEBBQADggEPADCCAQoCggEBAN5JAj+HydSGaxvA0AOcrXVTZ9FfsH0cMVBlQb72
+bGZgrRvkqtB011TNXZfsHl7rPxCY61DcsDJfFq3+8VHT+S9HE0qV1bEwP+oA3xc4
+Opq77av77cNNOqDC7h+jyPhHcUaE33iddmrH9Zn2ofWTSkKHHu3PAe5udCrc2QnD
+4PLRF6gqiEY1mcGknJrXj1ff/X0nRY/m6cnHNXz0Cvh8oPOtbdfGgfZjID2/fJNP
+fNoNKqN+5oJAZ+ZZ9id9rBvKj1ivW3F2EoGjZF268SgZzc5QrM/D1OpSBQf5SF/V
+qUPcQTgt9ry3YR+SZYazLkfKMEOWEa0WsqJVgXdQ6FyergcCAwEAAaN7MHkwDgYD
+VR0PAQH/BAQDAgEGMA8GA1UdEwEB/wQFMAMBAf8wHQYDVR0OBBYEFEa70kcseqU5
+bHx2zSt4bG21HokhMB8GA1UdIwQYMBaAFEa70kcseqU5bHx2zSt4bG21HokhMBYG
+A1UdEQQPMA2CC0Jyb2tlci1Sb290MA0GCSqGSIb3DQEBCwUAA4IBAQCGmE7NXW4T
+6J4mV3b132cGEMD7grx5JeiXK5EHMlswUS+Odz0NcBNzhUHdG4WVMbrilHbI5Ua+
+6jdKx5WwnqzjQvElP0MCw6sH/35gbokWgk1provOP99WOFRsQs+9Sm8M2XtMf9HZ
+m3wABwU/O+dhZZ1OT1PjSZD0OKWKqH/KvlsoF5R6P888KpeYFiIWiUNS5z21Jm8A
+ZcllJjiRJ60EmDwSUOQVJJSMOvtr6xTZDZLtAKSN8zN08lsNGzyrFwqjDwU0WTqp
+scMXEGBsWQjlvxqDnXyljepR0oqRIjOvgrWaIgbxcnu98tK/OdBGwlAPKNUW7Crr
+vO+eHxl9iqd4
+-----END CERTIFICATE-----

ccp/vars

@@ -1,19 +1,20 @@
-BROKER_ID=broker.dev.ccp-it.dktk.dkfz.de
+BROKER_ID=broker.ccp-it.dktk.dkfz.de
 BROKER_URL=https://${BROKER_ID}
 PROXY_ID=${SITE_ID}.${BROKER_ID}
-SPOT_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
-SPOT_BEAM_SECRET_LONG="ApiKey spot.${PROXY_ID} ${SPOT_BEAM_SECRET_SHORT}"
-REPORTHUB_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
-REPORTHUB_BEAM_SECRET_LONG="ApiKey report-hub.${PROXY_ID} ${REPORTHUB_BEAM_SECRET_SHORT}"
+FOCUS_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+FOCUS_RETRY_COUNT=32
 SUPPORT_EMAIL=support-ccp@dkfz-heidelberg.de
 PRIVATEKEYFILENAME=/etc/bridgehead/pki/${SITE_ID}.priv.pem
 
-# This will load id-management setup. Effective only if id-management configuration is defined.
-source $PROJECT/modules/id-management-setup.sh
+BROKER_URL_FOR_PREREQ=$BROKER_URL
+
+
+for module in $PROJECT/modules/*.sh
+do
+    log DEBUG "sourcing $module"
+    source $module
+done
+
 idManagementSetup
-# This will load nngm setup. Effective only if nngm configuration is defined.
-source $PROJECT/nngm-setup.sh
 nngmSetup
-source $PROJECT/exliquid-setup.sh
-exliquidSetup
 mtbaSetup

lib/functions.sh

@@ -9,14 +9,6 @@ detectCompose() {
 	fi
 }
 
-getLdmPassword() {
-	if [ -n "$LDM_PASSWORD" ]; then
-		docker run --rm docker.verbis.dkfz.de/cache/httpd:alpine htpasswd -nb $PROJECT $LDM_PASSWORD | tr -d '\n' | tr -d '\r'
-	else
-		echo -n ""
-	fi
-}
-
 exitIfNotRoot() {
   if [ "$EUID" -ne 0 ]; then
     log "ERROR" "Please run as root"
@@ -34,7 +26,7 @@ checkOwner(){
 }
 
 printUsage() {
-	echo "Usage: bridgehead start|stop|is-running|update|install|uninstall|enroll PROJECTNAME"
+	echo "Usage: bridgehead start|stop|is-running|update|install|uninstall|adduser|enroll PROJECTNAME"
 	echo "PROJECTNAME should be one of ccp|bbmri"
 }
 
@@ -171,7 +163,7 @@ function retry {
 
 function bk_is_running {
 	detectCompose
-	RUNNING="$($COMPOSE -p $PROJECT -f ./$PROJECT/docker-compose.yml $OVERRIDE ps -q)"
+	RUNNING="$($COMPOSE -p $PROJECT -f minimal/docker-compose.yml -f ./$PROJECT/docker-compose.yml $OVERRIDE ps -q)"
 	NUMBEROFRUNNING=$(echo "$RUNNING" | wc -l)
 	if [ $NUMBEROFRUNNING -ge 2 ]; then
 		return 0
@@ -180,6 +172,43 @@ function bk_is_running {
 	fi
 }
 
-##Setting Network properties
-# currently not needed
-#export HOSTIP=$(MSYS_NO_PATHCONV=1 docker run --rm --add-host=host.docker.internal:host-gateway ubuntu cat /etc/hosts | grep 'host.docker.internal' | awk '{print $1}');
+function do_enroll_inner {
+	PARAMS=""
+	
+	MANUAL_PROXY_ID="${1:-$PROXY_ID}"
+	if [ -z "$MANUAL_PROXY_ID" ]; then
+		log ERROR "No Proxy ID set"
+		exit 1
+	else
+		log INFO "Enrolling Beam Proxy Id $MANUAL_PROXY_ID"
+	fi
+
+	SUPPORT_EMAIL="${2:-$SUPPORT_EMAIL}"
+	if [ -n "$SUPPORT_EMAIL" ]; then
+		PARAMS+="--admin-email $SUPPORT_EMAIL"
+	fi
+
+	docker run --rm -v /etc/bridgehead/pki:/etc/bridgehead/pki samply/beam-enroll:latest --output-file $PRIVATEKEYFILENAME --proxy-id $MANUAL_PROXY_ID $PARAMS
+	chmod 600 $PRIVATEKEYFILENAME
+}
+
+function do_enroll {
+	do_enroll_inner $@
+}
+
+add_basic_auth_user() {
+   USER="${1}"
+   PASSWORD="${2}"
+   NAME="${3}"
+   PROJECT="${4}"
+   FILE="/etc/bridgehead/${PROJECT}.local.conf"
+   ENCRY_CREDENTIALS="$(docker run --rm docker.verbis.dkfz.de/cache/httpd:alpine htpasswd -nb $USER $PASSWORD  | tr -d '\n' | tr -d '\r')"
+   if [ -f $FILE ] && grep -R -q "$NAME=" $FILE # if a specific basic auth user already exists:
+   then
+     sed -i "/$NAME/ s|='|='$ENCRY_CREDENTIALS,|" $FILE
+   else
+     echo -e "\n## Basic Authentication Credentials for:\n$NAME='$ENCRY_CREDENTIALS'" >> $FILE;
+   fi
+ 	log DEBUG "Saving clear text credentials in $FILE. If wanted, delete them manually."
+   sed -i "/^$NAME/ s|$|\n# User: $USER\n# Password: $PASSWORD|" $FILE
+}

lib/install-bridgehead.sh

@@ -29,12 +29,16 @@ bridgehead ALL= NOPASSWD: BRIDGEHEAD${PROJECT^^}
 EOF
 
 # TODO: Determine whether this should be located in setup-bridgehead (triggered through bridgehead install) or in update bridgehead (triggered every hour)
-if [ -z "$LDM_PASSWORD" ]; then
-  log "INFO" "Now generating a password for the local data management. Please save the password for your ETL process!"
+if [ -z "$LDM_AUTH" ]; then
+  log "INFO" "Now generating basic auth for the local data management (see adduser in bridgehead for more information). "
   generated_passwd="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 32)"
+  add_basic_auth_user $PROJECT $generated_passwd "LDM_AUTH" $PROJECT
+fi
 
-  log "INFO" "Your generated credentials are:\n            user: $PROJECT\n            password: $generated_passwd"
-  echo -e "## Local Data Management Basic Authentication\n# User: $PROJECT\nLDM_PASSWORD=$generated_passwd" >> /etc/bridgehead/${PROJECT}.local.conf;
+if [ ! -z "$NNGM_CTS_APIKEY" ] && [ -z "$NNGM_AUTH" ]; then
+  log "INFO" "Now generating basic auth for nNGM upload API (see adduser in bridgehead for more information). "
+  generated_passwd="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 32)"
+  add_basic_auth_user "nngm" $generated_passwd "NNGM_AUTH" $PROJECT
 fi
 
 log "INFO" "Registering system units for bridgehead and bridgehead-update"

lib/monitoring.sh

@@ -47,8 +47,8 @@ function hc_send(){
 
     if [ -n "$2" ]; then
         MSG="$2\n\nDocker stats:\n$UPTIME"
-        echo -e "$MSG" | https_proxy=$HTTPS_PROXY_URL curl -A "$USER_AGENT" -s -o /dev/null -X POST --data-binary @- "$HCURL"/"$1" || log WARN "Monitoring failed: Unable to send data to $HCURL/$1"
+        echo -e "$MSG" | https_proxy=$HTTPS_PROXY_URL curl --max-time 5 -A "$USER_AGENT" -s -o /dev/null -X POST --data-binary @- "$HCURL"/"$1" || log WARN "Monitoring failed: Unable to send data to $HCURL/$1"
     else
-        https_proxy=$HTTPS_PROXY_URL curl -A "$USER_AGENT" -s -o /dev/null "$HCURL"/"$1" || log WARN "Monitoring failed: Unable to send data to $HCURL/$1"
+        https_proxy=$HTTPS_PROXY_URL curl --max-time 5 -A "$USER_AGENT" -s -o /dev/null "$HCURL"/"$1" || log WARN "Monitoring failed: Unable to send data to $HCURL/$1"
     fi
 }

lib/prepare-system.sh

@@ -52,6 +52,9 @@ case "$PROJECT" in
 	bbmri)
 		site_configuration_repository_middle="git.verbis.dkfz.de/bbmri-bridgehead-configs/"
 		;;
+	minimal)
+		site_configuration_repository_middle="git.verbis.dkfz.de/minimal-bridgehead-configs/"
+		;;
 	*)
 		log ERROR "Internal error, this should not happen."
         exit 1
@@ -68,8 +71,12 @@ if [ -d /etc/bridgehead ]; then
     fi
 elif [[ "$DEV_MODE" == "NODEV" ]]; then
     log "INFO" "Now cloning your site configuration repository for you."
-    read -p "Please enter your site: " site
-    read -s -p "Please enter the bridgehead's access token for your site configuration repository (will not be echoed): " access_token
+    if [ -z "$site" ]; then
+        read -p "Please enter your site: " site
+    fi
+    if [ -z "$access_token" ]; then
+        read -s -p "Please enter the bridgehead's access token for your site configuration repository (will not be echoed): " access_token
+    fi
     site_configuration_repository_url="https://bytoken:${access_token}@${site_configuration_repository_middle}$(echo $site | tr '[:upper:]' '[:lower:]').git"
     git clone $site_configuration_repository_url /etc/bridgehead
     if [ $? -gt 0 ]; then

lib/prerequisites.sh

@@ -62,6 +62,34 @@ if [ -e /etc/bridgehead/vault.conf ]; then
   fi
 fi
 
+log INFO "Checking network access ($BROKER_URL_FOR_PREREQ) ..."
+
+source /etc/bridgehead/${PROJECT}.conf
+source ${PROJECT}/vars
+
+set +e
+SERVERTIME="$(https_proxy=$HTTPS_PROXY_URL curl -m 5 -s -I $BROKER_URL_FOR_PREREQ 2>&1 | grep -i -e '^Date: ' | sed -e 's/^Date: //i')"
+RET=$?
+set -e
+if [ $RET -ne 0 ]; then
+	log WARN "Unable to connect to Samply.Beam broker at $BROKER_URL_FOR_PREREQ. Please check your proxy settings.\nThe currently configured proxy was \"$HTTPS_PROXY_URL\". This error is normal when using proxy authentication."
+	log WARN "Unable to check clock skew due to previous error."
+else
+	log INFO "Checking clock skew ..."
+
+	SERVERTIME_AS_TIMESTAMP=$(date --date="$SERVERTIME" +%s)
+	MYTIME=$(date +%s)
+	SKEW=$(($SERVERTIME_AS_TIMESTAMP - $MYTIME))
+	SKEW=$(echo $SKEW | awk -F- '{print $NF}')
+	SYNCTEXT="For example, consider entering a correct NTP server (e.g. your institution's Active Directory Domain Controller in /etc/systemd/timesyncd.conf (option NTP=) and restart systemd-timesyncd."
+	if [ $SKEW -ge 300 ]; then
+		report_error 5 "Your clock is not synchronized (${SKEW}s off). This will cause Samply.Beam's certificate will fail. Please setup time synchronization. $SYNCTEXT"
+		exit 1
+	elif [ $SKEW -ge 60 ]; then
+		log WARN "Your clock is more than a minute off (${SKEW}s). Consider syncing to a time server. $SYNCTEXT"
+	fi
+fi
+
 checkPrivKey() {
   if [ -e /etc/bridgehead/pki/${SITE_ID}.priv.pem ]; then
     log INFO "Success - private key found."
@@ -69,8 +97,6 @@ checkPrivKey() {
     log ERROR "Unable to find private key at /etc/bridgehead/pki/${SITE_ID}.priv.pem. To fix, please run\n  bridgehead enroll ${PROJECT}\nand follow the instructions."
     return 1
   fi
-  log INFO "Success - all prerequisites are met!"
-  hc_send log "Success - all prerequisites are met!"
   return 0
 }
 
@@ -80,4 +106,7 @@ else
   checkPrivKey || exit 1
 fi
 
+log INFO "Success - all prerequisites are met!"
+hc_send log "Success - all prerequisites are met!"
+
 exit 0

lib/update-bridgehead.sh

@@ -86,7 +86,7 @@ done
 # Check docker updates
 log "INFO" "Checking for updates to running docker images ..."
 docker_updated="false"
-for IMAGE in $(cat $PROJECT/docker-compose.yml ${OVERRIDE//-f/} | grep -v "^#" | grep "image:" | sed -e 's_^.*image: \(.*\).*$_\1_g; s_\"__g'); do
+for IMAGE in $(cat $PROJECT/docker-compose.yml ${OVERRIDE//-f/} minimal/docker-compose.yml | grep -v "^#" | grep "image:" | sed -e 's_^.*image: \(.*\).*$_\1_g; s_\"__g'); do
   log "INFO" "Checking for Updates of Image: $IMAGE"
   if docker pull $IMAGE | grep "Downloaded newer image"; then
     CHANGE="Image $IMAGE updated."
@@ -139,6 +139,15 @@ else
   log WARN "Automated backups are disabled (variable AUTO_BACKUPS != \"true\")"
 fi
 
+#TODO: the following block can be deleted after successful update at all sites
+if [ ! -z "$LDM_PASSWORD" ]; then
+  FILE="/etc/bridgehead/$PROJECT.local.conf"
+  log "INFO" "Migrating LDM_PASSWORD to encrypted credentials in $FILE"
+  add_basic_auth_user $PROJECT $LDM_PASSWORD "LDM_AUTH" $PROJECT
+  add_basic_auth_user $PROJECT $LDM_PASSWORD "NNGM_AUTH" $PROJECT
+  sed -i "/LDM_PASSWORD/{d;}" $FILE
+fi
+
 exit 0
 
 # TODO: Print last commit explicit

minimal/docker-compose.yml

@@ -0,0 +1,59 @@
+version: "3.7"
+
+services:
+  traefik:
+    container_name: bridgehead-traefik
+    image: docker.verbis.dkfz.de/cache/traefik:latest
+    command:
+      - --entrypoints.web.address=:80
+      - --entrypoints.websecure.address=:443
+      - --providers.docker=true
+      - --providers.docker.exposedbydefault=false
+      - --providers.file.directory=/configuration/
+      - --api.dashboard=true
+      - --accesslog=true
+      - --entrypoints.web.http.redirections.entrypoint.to=websecure
+      - --entrypoints.web.http.redirections.entrypoint.scheme=https
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.dashboard.rule=PathPrefix(`/api`) || PathPrefix(`/dashboard`)"
+      - "traefik.http.routers.dashboard.entrypoints=websecure"
+      - "traefik.http.routers.dashboard.service=api@internal"
+      - "traefik.http.routers.dashboard.tls=true"
+      - "traefik.http.routers.dashboard.middlewares=auth"
+      - "traefik.http.middlewares.auth.basicauth.users=${LDM_AUTH}"
+    ports:
+      - 80:80
+      - 443:443
+    volumes:
+      - /etc/bridgehead/traefik-tls:/certs:ro
+      - ../lib/traefik-configuration/:/configuration:ro
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+
+  forward_proxy:
+    container_name: bridgehead-forward-proxy
+    image: docker.verbis.dkfz.de/cache/samply/bridgehead-forward-proxy:latest
+    environment:
+      HTTPS_PROXY: ${HTTPS_PROXY_URL}
+      USERNAME: ${HTTPS_PROXY_USERNAME}
+      PASSWORD: ${HTTPS_PROXY_PASSWORD}
+    tmpfs:
+      - /var/log/squid
+      - /var/spool/squid
+    volumes:
+      - /etc/bridgehead/trusted-ca-certs:/docker/custom-certs/:ro
+
+  landing:
+    container_name: bridgehead-landingpage
+    image: docker.verbis.dkfz.de/cache/samply/bridgehead-landingpage:master
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.landing.rule=PathPrefix(`/`)"
+      - "traefik.http.services.landing.loadbalancer.server.port=80"
+      - "traefik.http.routers.landing.tls=true"
+    environment:
+      HOST: ${HOST}
+      PROJECT: ${PROJECT}
+      SITE_NAME: ${SITE_NAME}
+
+

minimal/modules/dnpm-compose.yml

@@ -0,0 +1,51 @@
+version: "3.7"
+
+services:
+  dnpm-beam-proxy:
+    image: docker.verbis.dkfz.de/cache/samply/beam-proxy:develop
+    container_name: bridgehead-dnpm-beam-proxy
+    environment:
+      BROKER_URL: ${DNPM_BROKER_URL}
+      PROXY_ID: ${DNPM_PROXY_ID}
+      APP_dnpm-connect_KEY: ${DNPM_BEAM_SECRET_SHORT}
+      PRIVKEY_FILE: /run/secrets/proxy.pem
+      ALL_PROXY: http://forward_proxy:3128
+      TLS_CA_CERTIFICATES_DIR: ./conf/trusted-ca-certs
+      ROOTCERT_FILE: ./conf/root.crt.pem
+    secrets:
+      - proxy.pem
+    depends_on:
+      - "forward_proxy"
+    volumes:
+      - /etc/bridgehead/trusted-ca-certs:/conf/trusted-ca-certs:ro
+      - /srv/docker/bridgehead/ccp/root-new.crt.pem:/conf/root.crt.pem:ro
+
+  dnpm-beam-connect:
+    depends_on: [ dnpm-beam-proxy ]
+    image: docker.verbis.dkfz.de/cache/samply/beam-connect:develop
+    container_name: bridgehead-dnpm-beam-connect
+    environment:
+      PROXY_URL: http://dnpm-beam-proxy:8081
+      PROXY_APIKEY: ${DNPM_BEAM_SECRET_SHORT}
+      APP_ID: dnpm-connect.${DNPM_PROXY_ID}
+      DISCOVERY_URL: "./conf/central_targets.json"
+      LOCAL_TARGETS_FILE: "./conf/connect_targets.json"
+      HTTP_PROXY: http://forward_proxy:3128
+      HTTPS_PROXY: http://forward_proxy:3128
+      NO_PROXY: dnpm-beam-proxy,dnpm-backend
+      RUST_LOG: ${RUST_LOG:-info}
+      NO_AUTH: "true"
+    volumes:
+      - /etc/bridgehead/dnpm/local_targets.json:/conf/connect_targets.json:ro
+      - /etc/bridgehead/dnpm/central_targets.json:/conf/central_targets.json:ro
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.dnpm-connect.rule=PathPrefix(`/dnpm-connect`)"
+      - "traefik.http.middlewares.dnpm-connect-strip.stripprefix.prefixes=/dnpm-connect"
+      - "traefik.http.routers.dnpm-connect.middlewares=dnpm-connect-strip"
+      - "traefik.http.services.dnpm-connect.loadbalancer.server.port=8062"
+      - "traefik.http.routers.dnpm-connect.tls=true"
+
+secrets:
+  proxy.pem:
+    file: /etc/bridgehead/pki/${SITE_ID}.priv.pem

minimal/modules/dnpm-setup.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+if [ -n "${ENABLE_DNPM}" ]; then
+	log DEBUG "DNPM setup detected (Beam.Connect) -- will start Beam and Beam.Connect for DNPM."
+	OVERRIDE+=" -f ./$PROJECT/modules/dnpm-compose.yml"
+
+	# Set variables required for Beam-Connect
+	DNPM_APPLICATION_SECRET="$(echo \"This is a salt string to generate one consistent password for DNPM. It is not required to be secret.\" | openssl pkeyutl -sign -inkey /etc/bridgehead/pki/${SITE_ID}.priv.pem | base64 | head -c 30)"
+	DNPM_BEAM_SECRET_SHORT="$(cat /proc/sys/kernel/random/uuid | sed 's/[-]//g' | head -c 20)"
+	DNPM_BROKER_ID="broker.ccp-it.dktk.dkfz.de"
+	DNPM_BROKER_URL="https://${DNPM_BROKER_ID}"
+	DNPM_PROXY_ID="${SITE_ID}.${DNPM_BROKER_ID}"
+fi

minimal/vars

@@ -0,0 +1,6 @@
+for module in $PROJECT/modules/*.sh
+do
+    log DEBUG "sourcing $module"
+    source $module
+done
+PRIVATEKEYFILENAME=/etc/bridgehead/pki/${SITE_ID}.priv.pem